D-Link WIRELESS G DCS-950G, User Manual

Page: 44 / 97

44
DCS-950G User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Click on the
Motion
button to enable motion detection.
Sets the measurable difference between two sequential images
that would indicate motion.
Sets the amount of motion in the window being monitored that
is required to initiate a motion detected alert. If this is set to
100%, motion is detected within the whole window to trigger
a snapshot. Note: Setting a higher sensitivity and a lower
percentage makes any motion more easily detected.
Click to open the corresponding motion window. To assign a
name to the window, enter the desired name in the entry field
next to the zone button.
Motion Detection
Tools > Motion Detection
Sensitivity:
Percentage:
Zone 1-3:
Motion Detection
Skip Time:
Increasing the time set here will avoid false alarms. This option
allows you to set the amount of time between motion detection
events before the next recording will start.
Motion: