60
D-Link WDA-130 User Manual
Section 5 - Troubleshooting
• Check that the LED indicators for the broadband modem are indicating normal activity. If not, there may be a problem
with the broadband connection.
• Check that the LED indicators on the wireless router are functioning properly. If not, check that the AC power and
Ethernet cables are firmly connected.
• Check that the IP address, subnet mask, gateway, and DNS settings are correctly entered for the network.
• In
Infrastructure mode
, make sure the same
Service Set Identifier (SSID)
is specified on the settings for the wireless
clients and access points. The
SSID
factory default setting for most D-Link products is
default
. (Double-click on the
WLAN icon in the taskbar. The
Link Info
screen will display the SSID setting.)
• Check that the
Network Connection
for the wireless client is configured properly. Select
AP (Infrastructure)
when
connecting to an access point. Double-click on the
WLAN icon
in the taskbar > click on
Configuration
to change the
settings for the wireless adapter.
4. What should I do when the computer with the WDA-1320 installed is unable to connect to the wireless network and/or the
internet?
Summary of Contents for WDA-1320
Page 1: ......