![background image](http://html1.mh-extra.com/html/d-link/vigilance-h-265/vigilance-h-265_user-manual_3256035009.webp)
9
D-Link Vigilance H.265 Outdoor Bullet Camera User Manual
Section 2: Installation
Installation
Mounting the Camera
It is highly recommended that you configure and test your camera before mounting it. Refer to
"Inserting the microSD Card" on page 14
and
"Software Installation" on page 15
for more information.
Step 1
Place the mounting sticker where you want to position the camera.
Use a 4 mm drill bit to make the required holes approximately 30 mm deep, then insert the
wall anchors into the holes.
Step 2
If you are running the camera cables out the side of the camera
, guide the camera cables
through the cable channel on the base.
Step 3
Use the screws provided to mount the camera to the wall.