D-Link SharePort DIR-825 User Manual Download Page 76

Page: 76 / 244

DIR-825

AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh

Gigabit Router with 3G/LTE Support and USB Port

User Manual

Configuring via Web-based Interface

Settings / Internet

WAN

On the

Settings / Internet

/ WAN

page, you can create and edit connections used by the router.

By default, a

Dynamic IPv4

connection is configured in the system. It is assigned to the

WAN

port of the router.

Figure 62. The

Settings / Internet / WAN

page. The simplified mode.

To edit an existing connection, click the

EDIT

button. Change the needed parameters and click the

APPLY

button.

To disconnect a connection and establish it again, click the

RECONNECT

button.

To remove an existing connection and create a new one, click the

CHANGE CONFIGURATION

button. Upon that the connection creation page opens.
To create several WAN connections, go to the advanced mode. To do this, click the

ADVANCED

MODE

button.

When connections of some types are created,

the

Settings / Internet

/ WAN

page

automatically displayed in the advanced mode.

Page

of 244

Summary of Contents for SharePort DIR-825





















































































































































































































































Search results

Summary of Contents for SharePort DIR-825

Reviews:

Related manuals for SharePort DIR-825

Brands by name

Popular brands

D-Link SharePort DIR-825, User Manual

Search results

Summary of Contents for SharePort DIR-825

Reviews:

Related manuals for SharePort DIR-825

Brands by name

Popular brands