D-Link SECURICAM Network DCS-900, Install Manual, Page: 14 / 20

14 D-Link DCS-900 Quick Install Guide
To add a new camera select the Camera button from the IPView
SE. Make sure that the green lights are on when clicking the camera
button.
Select the camera you would like to connect to and click
Add A
Camera
. If the camera is not listed in this list, click the
Input IP
Address
button. Enter the IP Address of the camera in the specified
field and click Add . If the IP Address is entered incorrectly or if you
have a bad network connection, a dialog box will appear to notify you
of the error. To add cameras in IPView SE, check that you have your
network configured correctly. To add a remote camera, you need to
have Internet access.
Add a New Camera
A green light under the camera button
means that there is already a camera
connected.