D-Link SECURICAM Network DCS-6620, User Manual, Page: 123 / 143

123
DCS-6620 User’s Manual
D-Link Systems, Inc.
Schedule Video Recording with Motion Detection
Schedule Video Recording with Motion
Detection
Next, run the
IP surveillance
program. Click on the
Configurations
button and select
Scheduler
.
 Check “Enable motion detection.”

Click on “New” to have a new window to monitor video.

Enter in a window name.

Adjust the “Sensitivity” and “Percentage” levels according to the local environment.
The highest sensitivity and lowest percentage provides the most sensitive setting.

After adding the motion window, click on save to enable the activity display. You can
add up to 3 motion windows to trigger recording.
To schedule video recording with motion detection, you must first enable motion detection on
the PTZ Internet Camera. Click the
Motion Detection
button under the
Advanced
tab from the
Configuration
screen to access settings that affect how the
DCS-6620
PTZ Internet Camera can
serve as a security device by recording only when motion is detected. Note: These settings
can be configured in your Web browser and while logged into the
IP surveillance
Program.
Click
Motion Detection
In this window, follow the steps below to ensure that motion detection is correctly enabled:
For detailed information about each setting, please refer to
Configuration > Advanced > Motion
Detection
in the section titled “Using the
DCS-6620
With an Internet Browser” (page 52).