manualshive.com logo in svg

D-Link SECURICAM Network DCS-2100G, User Manual

Share
Download
D-Link SECURICAM Network DCS-2100G User Manual Download Page 52

52

DCS-2100G User’s Manual

D-Link Systems, Inc.

Using the DCS-2100G with an Internet Browser

The domain name or IP address of the external FTP server.
Note that the 2nd FTP server will only be used if the 1st FTP
server is unavailable. If the image upload to the 1st FTP server
is successful, no attempts will be made to connect to the 2nd
FTP server.

Granted user name on the backup FTP server.

Granted password on the backup FTP server.

Granted folder on the backup FTP server.

Passive mode setting for the backup FTP server.

2nd FTP user

name:

2nd FTP server:

2nd FTP

password:

2nd FTP remote

folder:

Secondary FTP

passive mode:

Invalid settings may cause the DCS-2100G to not respond. Change the configuration
settings only if necessary. Consult with your network administrator or your Internet Service
Provider (ISP) if you do not have the necessary information.  If you cannot connect to
the camera, refer to page 129 for camera reset and restore factory settings procedures.

Summary of Contents for SECURICAM Network DCS-2100G














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands