4
Configuring your camera with IP
Installer (continued)
This is the first screen that will appear.
The IP Installer will now show a MAC
address of the DCS-2100+ and an
IP Address (which may or may not be
correct depending on what you have
your DCS-2100+ connected to.)
If you have a DHCP* server on your
network, a valid IP Address will be
displayed here.
* A DHCP server is a device that
supplies IP Addresses to its
clients that are on the same network.
If the IP installer does not display any
devices, lightly insert a paper clip into the
reset opening on the unit’s rear panel until
the light starts to cycle (a series of blinks)
twice, then let go.