D-Link SECURICAM DCS-5635 User Manual Download Page 45

Page: 45 / 105

D-Link DCS-5605/5635 User Manual

Section 3 - Configuration

There are 5 tabs across the top of the Configuration screen.

The

LIVE VIDEO

page is used for viewing live video and audio.

The

SETUP

page is used for basic setup of the DCS-5605/5635.

The

MAINTENANCE

page is used for server system

maintenance.

The

STATUS

page will show the camera’s status and logs.

The

HELP

page contains useful information about the setup

and features of the DCS-5605/5635.

DCS-5605/5635 Configuration

Setup

The Setup page provides the following configuration options: Wizard, Network Setup, Wireless Setup, Dynamic DNS,

Image Setup, Audio and Video, Mail and FTP, Motion Detection, Time and Date, Schedule, Access List, Camera

Control, and Logout.

Summary of Contents for SECURICAM DCS-5635










































































































Search results

Summary of Contents for SECURICAM DCS-5635

Reviews:

Related manuals for SECURICAM DCS-5635

Brands by name

Popular brands

D-Link SECURICAM DCS-5635, User Manual

Search results

Summary of Contents for SECURICAM DCS-5635

Reviews:

Related manuals for SECURICAM DCS-5635

Brands by name

Popular brands