![background image](http://html1.mh-extra.com/html/d-link/securicam-dcs-5605/securicam-dcs-5605_quick-install-manual_3426818006.webp)
D-Link DCS-5605/5635 Quick Install Guide
6
6
Configuration with Wizard
EN
G
LI
SH
Configuration
1. Click
Installation Wizard
to begin the installation. Install
the Setup Wizard SE and execute the program.
Insert the DCS-5605/5635 CD into your computer's CD-ROM drive to begin the installation.
If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start
automatically, click
Start > Run
. Type
D:\autorun.exe
, where D: represents the drive letter of
your CD-ROM drive.
5. Take a moment to confirm your settings and click
Restart
to
reboot the camera.
4. Select DHCP if your camera obtains an IP address automatically
when it boots up. Select static IP if the camera will use the same IP
address each time it is started.
Click
Next
to proceed to the next page.
3. Enter the Admin ID and password. When logging in for the first
time, the default Admin ID is
admin
with the password left blank.
Click
Next
to proceed to the next page.
2. The Setup Wizard will appear and display the MAC address
and IP address of your camera(s). If you have a DHCP server
on your network, a valid IP Address will be displayed. If
your network does not use a DHCP server, the camera's
default static IP
192.168.0.20
will be displayed.
Click the
Wizard
button to continue.