D-Link RANGEBOOSTER G WUA-2340 Page 12 User Manual Download

Page: 12 / 84

D-Link WUA-340 User Manual

Section - Installation

Warning: Do NOT install the WUA-2340 USB Adapter into your computer before installing the driver software
from the D-Link CD.

Turn on the computer and Insert the D-Link WUA-2340 Driver CD in the CD-ROM drive.

If the CD Autorun function does not automatically start on your computer, go to

Start > Run. In the run box type

“

D:\WUA-2340.exe” (where

represents the drive letter of your CD-ROM drive).

If the CD Autorun function does not automatically start
on your computer, type “

D:\Drivers\setup.exe”. If it does

start, proceed to the next screen.

Click

Install Drivers.

Software Installation

Summary of Contents for RANGEBOOSTER G WUA-2340





















































































Search results

Summary of Contents for RANGEBOOSTER G WUA-2340

Reviews:

Related manuals for RANGEBOOSTER G WUA-2340

Brands by name

Popular brands

D-Link RANGEBOOSTER G WUA-2340, User Manual

Search results

Summary of Contents for RANGEBOOSTER G WUA-2340

Reviews:

Related manuals for RANGEBOOSTER G WUA-2340

Brands by name

Popular brands