11
D-Link DHP-300 Quick Install Guide
Configuration
Click
Next
This screen shows the current
configuration of the DHP-300.
You can modify any of the
parameters and click
Next
to
save your configuration.
•
Net ID
:
Powerline network name
(case sensitive).
Default is
DHP-300
.
• Encryption Key
:
Powerline network password (alphanumeric).
Default is
DHP-300
.
• Password
:
Configuration Assistant password (alphanumeric).
Default is
admin
.
•
Alias:
Device name (case sensitive).
Default is
Device 1, Device 2,
etc...
Click
Next
Configure the PLC connected nodes first (the remote DHP-300 which
is not connected to the PC), and configure the ETH connected node
last (the local DHP-300 connected to the PC).
Note:
If you configure the ETH
node first and change the Net
ID or Encryption Key, you will
not have access the the PLC
nodes.
To configure a DHP-300, select it
and click
Next
to continue.
