11
D-Link DHP-W313AV User Manual
Section 2 - Installation
Hardware Installation
Step 1:
- Ensure that the DHP-308AV is connected to your router, via an Ethernet cable and plugged into a nearby power outlet.
Step 2:
- Plug the DHP-W312AV into a wall outlet where you want to extend your network and connect it to a computer via Ethernet cable (for the setup
wizard).
Step 3:
- Press the
Simple Connect
button on the DHP-308AV device for 3 seconds. Then, within two minutes, press the
WPS
(Simple Connect) button on
the DHP-W312AV for 3 seconds. The Powerline devices will then reboot and connect.
Note:
Network connectivity is confirmed when the Powerline LEDs indicators on both Powerline devices are steadily lit. This will indicate that your network
is now secure.
Note:
Both DHP-W312AV and DHP-308AV are required to create a Powerline network.
ROOM A
Router
Internet
DHP-W312AV
ROOM B
DHP-308AV