Section 2 – Installation
4Port 2x2 wireless ADSL modem User Manual
11
Information you will need
Username
This is the Username needed to access the Router’s management interface. When you attempt to connect to the device through a web browser you
will be prompted to enter this Username. The default Username for the Router is “admin.” The user cannot change this.
Password
This is the Password you will be prompted to enter when you access the Router’s management interface. The default Password is “admin.” The
user may change this.
LAN IP addresses for the 4port 2x2 Wireless ADSL Router
This is the IP address you will enter into the Address field of your web browser to access the Router’s configuration graphical user interface (GUI)
using a web browser. The default IP address is 192.168.1.1. This may be changed to suit any IP address scheme the user desires. This address will
be the base IP address used for DHCP service on the LAN when DHCP is enabled.
LAN Subnet Mask for the 4port 2x2 Wireless ADSL Router
This is the subnet mask used by the 4port 2x2 Wireless ADSL Router, and will be used throughout your LAN. The default subnet mask is
255.255.255.0. This can be changed later.
