manualshive.com logo in svg

D-Link nuclias connect DAP-2662, User Manual

Share
Download
D-Link nuclias connect DAP-2662 User Manual Download Page 66

Web User Interface

66

This page allows the user to configure a WLAN Partition.

Wireless Band:

Link Integrity:

Ethernet WLAN Access:

Internal Station 

Connection:

Displays the current wireless band.

Select 

Enable

 or 

Disable

. If the Ethernet 

connection between the LAN and the AP is 

disconnected, enabling this feature will cause 

the wireless segment associated with the AP to 

be disassociated from the AP.

The default is Enable. When disabled, all data 

from the Ethernet to associated wireless devices 

will be blocked. Wireless devices can still send 

data to the Ethernet.

The default value is Enable, which allows stations 

to intercommunicate by connecting to a target 

AP. When disabled, wireless stations cannot 

exchange data on the same Multi-SSID. In Guest 

mode, wireless stations cannot exchange data 

with any station on your network.

WLAN Partition

Summary of Contents for nuclias connect DAP-2662
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands