D-Link NetDefendOS User Manual Download | Manualshive

Page: 78 / 912

background image

2.2. System Date and Time

2.2.1. Overview

Correctly setting the date and time is important for NetDefendOS to operate properly. Time
scheduled policies, auto-update of the IDP and Anti-Virus databases, and other product features
such as digital certificates require that the system clock is accurately set.

In addition, log messages are tagged with time-stamps in order to indicate when a specific event
occurred. Not only does this assume a working clock, but also that the clock is correctly
synchronized with other equipment in the network.

Methods of Setting the Time

NetDefendOS provides two methods of setting the time:

•

Setting Manually

The date and time can be set manually by the administrator. This is described in

Section 2.2.2,

“Setting Date and Time Manually”

.

•

Setting Automatically Using External Time Servers

NetDefendOS supports the use of external

time Servers

using

time synchronization protocols

to

automatically adjust the local system clock from the response to queries sent over the public
Internet to these servers. This is described further in

Section 2.2.4, “Using External Time

Servers”

.

There are two types of time server that NetDefendOS can use:

i.

Public Servers - These are servers that can be used by anyone.

ii.

D-Link Servers - These are D-Link's own time servers and is the recommended method
of setting the date and time.

2.2.2. Setting Date and Time Manually

Current Date and Time

The administrator can set the date and time manually and this is recommended when a new
NetDefendOS installation is started for the first time.

Example 2.19. Setting the Current Date and Time

To adjust the current date and time, follow the steps outlined below:

Command-Line Interface

gw-world:/> time -set YYYY-mm-DD HH:MM:SS

Where YYYY-mm-DD HH:MM:SS is the new date and time. Note that the date order is year, then
month and then day. For example, to set the date and time to 9:25 in the morning on April 27th,
2008 the command would be:

Chapter 2: Management and Maintenance

78

«
...
76
77
78
79
80
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: IBASE Technology Pages: 69

DefensePro 6.02

Brand: Radware Pages: 339

BattleHub GFH600BH

Brand: IOGear Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands