3.38. EthernetDevice
Description
Hardware settings for an Ethernet interface.
Properties
Name
Specifies
a
symbolic
name
for
the
device.
(Identifier)
EthernetDriver
The Ethernet PCI driver that should be used by the
interface.
PCIBus
PCI bus number where the Ethernet adapter is
installed.
PCISlot
PCI slot number used by the Ethernet adapter.
PCIPort
Some Ethernet adapters have multiple ports that
share the same bus and slot number. This
parameter specifies what port to be used.
Media
Specifies
if
the
link
speed
should
be
auto-negotiated or locked to a static speed.
(Default: Auto)
Duplex
Specifies if the duplex should be auto-negotiated
or locked to full or half duplex. (Default: Auto)
MACAddress
The hardware address for the interface. (Optional)
Comments
Text describing the current object. (Optional)
Chapter 3: Configuration Reference
173
Summary of Contents for NetDefend DFL-260E
Page 21: ...Chapter 1 Introduction 21...
Page 104: ...Chapter 2 Command Reference 104...
Page 240: ...Comments Text describing the current object Optional Chapter 3 Configuration Reference 240...
Page 317: ...Comments Text describing the current object Optional Chapter 3 Configuration Reference 317...
