2.53. SNMP
These log messages refer to the SNMP (Allowed and disallowed SNMP accesses) category.
2.53.1. disallowed_sender (ID: 03100001)
Default Severity
Log Message
Disallowed SNMP from <peer>, disallowed sender IP
Explanation
The sender IP address is not allowed to send SNMP data to the unit.
Dropping packet.
Gateway Action
drop
Recommended Action
If this sender IP address should have SNMP access to the unit, this
should be configured in the ACCESS section.
Revision
1
Parameters
peer
Context Parameters
2.53.2. invalid_snmp_community (ID: 03100002)
Default Severity
Log Message
Disallowed SNMP from <peer>, invalid community string
Explanation
The SNMP community string is invalid.
Gateway Action
drop
Recommended Action
Make sure the entered SNMP community string is correct.
Revision
1
Parameters
peer
Context Parameters
2.53.3. snmp3_received_unautherized_message (ID: 03100100)
Default Severity
Log Message
Disallowed SNMP from <peer>, authentication failed
Explanation
Calculated message digest is not the same as received digest.
Gateway Action
drop
Recommended Action
Investigate client that send unauthorized messages.
Chapter 2: Log Message Reference
557
Summary of Contents for NetDefend DFL-260E
