2.43.17. pptpclient_connected (ID: 02700018)
Default Severity
Log Message
PPTP client <iface> connected to <remotegw>, requesting control
connection
Explanation
A PPTP client has established a connection to its remote gateway
and is sending a control connection request message.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
iface
remotegw
2.43.18. pptp_tunnel_up (ID: 02700019)
Default Severity
Log Message
PPTP tunnel up, client <remotegw> connected to <iface>
Explanation
A remote PPTP client has established a connection to this PPTP
server.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
iface
remotegw
2.43.19. ctrlconn_refused (ID: 02700020)
Default Severity
Log Message
The remote PPTP server on <remotegw> refused to establish PPTP
control connection. Reason: <reason>
Explanation
A remote PPTP server refused to establish PPTP control connection.
Gateway Action
None
Recommended Action
Read the reason specified by the PPTP server. This might give a clue
why the PPTP server refused the PPTP control connection.
Revision
1
Parameters
reason
Chapter 2: Log Message Reference
513
Summary of Contents for NetDefend DFL-260E
