Gateway Action
ppp_terminated
Recommended Action
Try to reconfigure the peer so it does not demand the use of this LCP
option.
Revision
1
Parameters
tunnel_type
unsupported_lcp_option
2.41.10. ppp_tunnel_limit_exceeded (ID: 02500100)
Default Severity
Log Message
PPP Tunnel license limit exceeded. PPP terminated
Explanation
PPP is terminated because the license restrictions do not allow any
more PPP tunnels. No new PPP tunnels can be established until an
existing one is closed.
Gateway Action
ppp_terminated
Recommended Action
Upgrade your license to allow more simultaneous PPP tunnels.
Revision
1
Parameters
tunnel_type
limit
2.41.11. authentication_failed (ID: 02500101)
Default Severity
Log Message
Authentication failed. PPP terminated
Explanation
Authentication failed. PPP terminated.
Gateway Action
ppp_terminated
Recommended Action
Make sure that the right username and password is used.
Revision
1
Parameters
tunnel_type
user
2.41.12. response_value_too_long (ID: 02500150)
Default Severity
Log Message
PPP CHAP response value was truncated because it was too long
Explanation
PPP CHAP response value was truncated because it was too long.
Chapter 2: Log Message Reference
501
Summary of Contents for NetDefend DFL-260E
