Default Severity
Log Message
Did not find a matching userauth rule for this L2TP server! Tunnel ID:
<tunnelid>, Session ID: <sessionid>
Explanation
The L2TP server was unsuccessful trying to find a matching userauth
rule.
Gateway Action
None
Recommended Action
Make sure the userauth rules are configured correctly.
Revision
1
Parameters
tunnelid
sessionid
2.37.13. l2tp_session_request (ID: 02800015)
Default Severity
Log Message
L2TP session request received. Tunnel ID: <tunnelid>
Explanation
A new session request was received on the specified tunnel.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
tunnelid
2.37.14. l2tp_session_up (ID: 02800016)
Default Severity
Log Message
L2TP session up. Tunnel ID: <tunnelid>, Session ID: <sessionid>,
User: <user>, Auth: <auth>, MPPE: <mppe>, Assigned IP:
<assigned_ip>
Explanation
The L2TP session negotiation has completed successfully.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
tunnelid
sessionid
user
auth
mppe
assigned_ip
Chapter 2: Log Message Reference
461
Summary of Contents for NetDefend DFL-260E
