background image

Attention

FCC:

This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no guarantee that 

interference will not occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures: 

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver. 

—Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

—Consult the dealer or an experienced radio/TV technician for help. This device must 

not be co-located or operating in conjunction with any other antenna or transmitter.

 

Operation is subject to the following two conditions:  (1) this device may not cause 

harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

NOTE:   THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS 

NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH 

MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an 

uncontrolled environment. This equipment should be installed and operated with 

minimum distance 20cm between the radiator & your body. 

IC

This device complies with Industry Canada’s licence-exempt RSSs. Operation is 

subject to the following two conditions:

(1)

This device may not cause interference; and

(2)

This device must accept any interference, including interference

 

that may cause 

undesired operation of the device.  

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux 

appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions 

suivantes :

(1)

l’appareil ne doit pas produire de brouillage;

(2)

l’utilisateur de l’appareil doit accepter tout brouillage

 

radioélectrique subi, même 

si le brouillage est susceptible d’en

 

compromettre le fonctionnement. 

The device meets the exemption from the routine evaluation limits in section 2.5 of 

RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian 

information on RF exposure and compliance. 

(3) Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la 

section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut 

obtenir l'information canadienne sur l'exposition et la conformité de rf. 

Reviews: