background image

19

Section 3 - Configuration

Enter the IP address assigned by your ISP.

Enter the Subnet Mask assigned by your ISP.

Enter the Gateway assigned by your ISP.

The  DNS  server  information  will  be  supplied  by  your  ISP  (Internet  Service 

Provider.)

Maximum Transmission Unit - you may need to change the MTU for optimal 

performance with your specific ISP. 1500 is the default MTU.

The default MAC Address is set to the Internet port’s physical interface MAC address 

on the Broadband Router. It is not recommended that you change the default 

MAC address unless required by your ISP. You can use the 

Clone Your PC’s MAC 

Address

 button to replace the Internet port’s MAC address with the MAC address 

of your Ethernet card.

IP Address:

Subnet Mask:

Default Gateway:

DNS Servers:

MTU:

MAC Address:

Static (assigned by ISP)

Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, 

gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which 

are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.

L7-N-R2000 User Manual

Summary of Contents for L7NR2000A1














































































































Reviews: