manualshive.com logo in svg

D-Link GLB-802C, User Manual

Share
Download
D-Link GLB-802C User Manual Download Page 33

CHAPTER-3 

D-Link GLB-802C ADSL2+ Router User Manual                                                   

30

 

 

 

•

 

Click on Commit button to save the settings. 

•

 

Click on Reboot with Reboot mode as “Reboot” to restart the router. 

•

 

Reboot from Default Configuration reboots the device to factory default settings   

 

3.3.8.3 Local Image Upgrade 

Click “Admin>Local Image Upgrade” to show the following page, it allows to upgrade the image. In the 
Upgrade File text-box, type the following path and file name of the file or click on Browse and specify 
the path and click on Upload. When loading is complete, a message indicating the same is displayed. For 
the new image to take effect, reboot the router   
   

 

 

When loading is complete, reboot the device for the new image to take effect.   

 

3.3.8.4 Diagnostics 
 

The diagnostics page allows to run a series of diagnostic tests of the system software and hardware 

connections. Ping and Traceroute utilities are also available to troubleshoot connection problems. 

 

. 

 

 

 

 

 

 

Summary of Contents for GLB-802C









































Reviews:

No comments

Brands by name

Popular brands

Load more brands