16
Home > LAN (continued)
Web Configuration
NOTE
: If DHCP Client is enabled, but there is no DHCP server, the DNS-120 will fall
back to the default IP address of
192.168.0.101
.
Once all changes to the LAN settings have been made, click the
Apply
button to put the
changes into effect. The DNS-120 will then reboot itself. Wait approximately 30 seconds
before attempting to log in again.
To clear any changes made to the settings and start over again, click the
Cancel
button.
To access online help for the LAN Settings, click the
Help
button.
Home > Device
Device Settings
These are additional settings to affect how the DNS-120 will appear on a Windows PC.
The settings shown above are factory default and can be accepted with no further changes.
Workgroup – Enter name of workgroup for the DNS-120
Name – Enter name of the DNS-120 as it will appear in Windows
Description – Enter brief description of this DNS-120 unit
