Diagnostics and Checking Communications
Included on the CD-ROM is a "DFE-670TXD PCMCIA Adapter
Driver Program." It is a diagnostic program that will help you
determine if any faults exist in your DFE-670TXD Network
Adapters or connection.
1.
Restart your computer in MS-DOS mode. (Click "Start,"
then "Shut Down…," and finally select "Restart the
computer in MS-DOS mode.")
2.
Insert the CD-ROM labeled "DFE-670TXD PCMCIA
Ethernet Adapter Driver Program" into your CD-ROM D:\
3.
Type D:\DIAG.EXE at the MS-DOS prompt and press
"Enter" to start the D-Link PCMCIA Fast Ethernet Adapter
Diagnostic Program.
4.
Read and follow the instructions on the screen (Press F1
key anytime for additional help.)
5.
"Adapter Basic Diagnostic" will determine if any problems
exist with DFE-670TXD.
6.
"Network Diagnostic" will determine if problems exist with
your network or connections. To use "Network Diagnostic,"
please run program on both computers in MS-DOS Mode.
If you encounter any problems, please contact
D-Link technical support.
TROUBLESHOOTING
continued
8
