manualshive.com logo in svg

D-Link EXO DIR-X6060, User Manual, Page: 157 / 178

Share
Download
D-Link EXO DIR-X6060 User Manual Download Page 157

152

D-Link DIR-X6060 User Manual

Appendix F - Regulatory Statements

FCC Caution: 

Any changes or modifications not expressly approved by the party responsible for compliance could void the 

user's authority to operate this equipment.

For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not 

possible.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

 

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment 

should be installed and operated with minimum distance 30 cm between the radiator and your body.

Summary of Contents for EXO DIR-X6060



















































































































































































Reviews:

No comments