D-Link DXS-3600-16S Hardware Installation Manual Download Page 8

Page: 8 / 36

DXS-3600 Series 10GbE Layer 2/3 Switch Hardware Installation Guide

If any item is missing or damaged, please contact your local D-Link reseller for replacement.

Features

This switch is action packed with an abundance of networking features that span inside and outside of the traditional
Layer 3 framework. The list below highlights the significant protocols and features supported by this switch.

Features that can be found on this switch are:

•

• D-Link License Management System (DLMS)

• IP Interface

• Jumbo Frames (12 KBytes)

• Spanning Tree Protocol (STP, RSTP, MSTP)

• Port Mirroring

• Link Aggregation

• Priority-based Flow Control (PFC)

• Layer 2 Multicast Filtering

• IGMP Snooping (Versions 1, 2, 3)

• IGMP and MLD Proxy

• Secure Shell (SSH)

• 802.1Q VLAN

• Port-based VLAN

• MAC-based VLAN

• VLAN Trunking

• Private VLAN

• Subnet-based VLAN

• Q-in-Q

• VLAN Translation

• Quality of Service (QoS)

• Queue Handling

• Class of Service (CoS)

• Bandwidth Control

• Three Color Marker

• Congestion Control

• Access Control List (ACL)

• Time Based ACL

• Traffic Segmentation

• Port Security

• Broadcast/Multicast/DLF Storm Control

• BPDU Attack Protection

• DoS Prevention

• 802.1X Network Access Control

• Access Authentication Control (AAA)

• Guest VLAN

• User Account Privilege for Management Access

• RADIUS Accounting

• Address Resolution Protocol (ARP)

• Link Layer Discovery Protocol (LLDP)

• Static Routing

• Web-based Graphical User Interface (Web GUI)

• Command Line Interface (CLI)

• Traffic Monitoring

• Telnet Server and Client

• TFTP Client

• FTP Client

• Simple Network Management Protocol (SNMP)

• System Log

• DHCP Server and Client

• CPU Monitoring

• DHCP Relay

• Trap/ Log Severity Control

• Multiple Image and Configuration

• Flash File System (FFS)

• Password Recovery and Encryption

• Simple Network Time Protocol (SNTP)

• Debug Command

• Traceroute and Ping

• DNS Resolver and Relay

• Virtual Router Redundancy Protocol (VRRP)

• Routing Information Protocol (RIP)

• Open Shortest Path First (OSPF)

• Border Gateway Protocol (BGP)

• Multicast Listener Discovery (MLD)

• Route Preference and Distribution

• Internet Group Management Protocol (IGMP)

• Multicast Duplication

• Protocol Independent Multicast (DM, SM, SSM, Sparse-
Dense)

• Distance Vector Multicast Routing Protocol (DVMRP)

Summary of Contents for DXS-3600-16S





































Search results

Summary of Contents for DXS-3600-16S

Reviews:

Related manuals for DXS-3600-16S

Brands by name

Popular brands

D-Link DXS-3600-16S, Hardware Installation Manual

Search results

Summary of Contents for DXS-3600-16S

Reviews:

Related manuals for DXS-3600-16S

Brands by name

Popular brands