DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
224
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
After clicking the
Edit
button, the following page will appear.
Figure 6-48 VRRP Settings (Edit) Window
The fields that can be configured are described below:
Parameter
Description
Advertisement Interval
Enter the advertisement interval value here. This is the time interval between
successive VRRP advertisements by the master router. The range is from 1 to
255 seconds. By default, this value is 1 second.
Preemption
Select to enable or disable the preemption feature here. This feature is used to
allow a router to take over the master role if it has a better priority than the current
master.
Priority
Enter the priority value here. The range is from 1 to 254.
BFD Remote IP
Enter the VRRP group's BFD peer address here.
Critical IP Address
Enter the critical IPv4 address here. If the critical IP is configured on one virtual
router, the virtual router cannot be activated when the critical IP address is
unreachable. One VRRP group can only track one critical IP.
Shutdown
Select to enable or disable the shutdown feature here. This feature is used to
disable a virtual router on an interface. Avoid the common mistake of shutting
down the IP address owner router before shutting down other non-owner routers.
Click the
Back
button to return to the previous window.
Click the
Apply
button to accept the changes made.
VRRPv3 Settings
This window is used to display and configure VRRP version 3 (VRRPv3) settings.
To view the following window, click
L3 Features > VRRPv3 Settings
, as shown below:
Summary of Contents for DXS-3400 SERIES
Page 1: ......
