manualshive.com logo in svg

D-Link DXS-3326GSR - xStack Switch - Stackable, User Manual

Share
Download
D-Link DXS-3326GSR - xStack Switch - Stackable User Manual Download Page 163

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual

 

 

160

show  authen_login  

Parameters 

default 

– Entering this parameter will display the default method list 

for users logging on to the Switch. 

method_list_name <string 15>

 – Enter an alphanumeric string of up 

to 15 characters to define the given 

method list 

to view. 

all

 – Entering this parameter will display all the authentication login 

methods currently configured on the Switch. 

Restrictions Only 

administrator-level users can issue this command. 

Example usage: 

 

To view all method list configurations: 

DGS-3324SRi:4#show authen_login method_list_name all 

Command: show authen_login method_list_name all 

 
Method List Name  Priority    Method Name   Comment 
----------------              --------        ---------------       --------- 
Darren                       1                          Built-in Group 
default                       1               radius              Built-in Group 
GoHabs!                    1               Newfie             User-defined Group 
Trinity                        1               local                 Keyword 
 

DGS-3324SRi:4# 

 

create authen_enable method_list_name 

Purpose 

Used to create a user-defined method list of authentication methods for 
promoting normal user level privileges to Administrator level privileges 
on the Switch. 

Syntax 

create authen_enable method_list_name <string 15> 

Description 

This command is used to promote users with normal level privileges to 
Administrator level privileges using authentication methods on the 
Switch. Once a user acquires normal user level privileges on the 
Switch, he or she must be authenticated by a method on the Switch to 
gain administrator privileges on the Switch, which is defined by the 
Administrator. A maximum of eight (8) enable method lists can be 
implemented on the Switch. 

Parameters 

<string 15> 

– 

 

Enter an alphanumeric string of up to 15 characters to 

define the given 

enable method list 

to create. 

Restrictions Only 

administrator-level users can issue this command. 

Example usage: 

 

To create a user-defined method list, named “Permit” for promoting user privileges to Administrator privileges: 

DGS-3324SRi:4#create authen_enable method_list_name Permit 
Command: show authen_login method_list_name Permit 
 
Success. 
 
DGS-3324SRi:4# 

 

Summary of Contents for DXS-3326GSR - xStack Switch - Stackable











































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands