D-Link DWS-4026 User Manual Download Page 44

Page: 44 / 576

D-Link Unified Access System

Software User Manual

12/10/09

Page 44

About This Document

Document

34CSFP6XXUWS-SWUM100-D7

DDITIONAL

OCUMENTATION

The following documentation provides additional information about D-Link software:

•

The

D-Link CLI Command Reference describes the commands available from the command-line interface (CLI) for

managing, monitoring, and configuring the switch.

•

The

D-Link Wired Configuration Guide contains a variety of configuration examples that show how to configure the

wired features on the switch.

•

Release notes for this D-Link product detail the platform-specific functionality of the software packages, including issues
and workarounds.

OCUMENT

ONVENTIONS

This section describes the conventions this document uses.

This guide uses the typographical conventions described in

Table 1

A note provides more information about a feature or technology.

Caution!

A caution provides information about critical aspects of the configuration, combinations of settings,

events, or procedures that can adversely affect network connectivity, security, and so on.

Table 1: Typographical Conventions

Symbol

Description

Example

Bold

Menu titles, button names, and keyboard names when
referred to in steps

Click

Submit

to apply your settings.

Blue Text

Hyperlinked text.

See

Section : “About This

Document” on page 43

courier font

Command-line text and file names

(switch-prompt)#

Summary of Contents for DWS-4026
































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DWS-4026

Reviews:

D-Link DWS-4026, User Manual, Page: 44 / 576

Search results

Summary of Contents for DWS-4026

Reviews: