D-Link DWS-4000 Series, Cli Command Reference

Page: 61 / 566

53
GMRP Commands
set gmrp interfacemode
This command enables GARP Multicast Registration Protocol on a single interface (Interface Config mode) or all interfaces
(Global Config mode). If an interface which has GARP enabled is enabled for routing or is enlisted as a member of a port-
channel (LAG), GARP functionality is disabled on that interface. GARP functionality is subsequently re-enabled if routing is
disabled and port-channel (LAG) membership is removed from an interface that has GARP enabled.
no set gmrp interfacemode
This command disables GARP Multicast Registration Protocol on a single interface or all interfaces. If an interface which
has GARP enabled is enabled for routing or is enlisted as a member of a port-channel (LAG), GARP functionality is disabled.
GARP functionality is subsequently re-enabled if routing is disabled and port-channel (LAG) membership is removed from
an interface that has GARP enabled.
show gmrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for one or all interfaces.
Format
no set gmrp adminmode
Mode Privileged EXEC
Default disabled
Format
set gmrp interfacemode
Mode • Interface Config
• Global Config
Format
no set gmrp interfacemode
Mode • Interface Config
• Global Config
Format
show gmrp configuration {<slot/port> | all}
Mode • Privileged EXEC
• User EXEC
Term Definition
Interface The slot/port of the interface that this row in the table describes.
Join Timer The interval between the transmission of GARP PDUs registering (or re-registering) membership for
an attribute. Current attributes are a VLAN or multicast group. There is an instance of this timer on a
per-port, per-GARP participant basis. Permissible values are 10 to 100 centiseconds (0.1 to 1.0
seconds). The factory default is 20 centiseconds (0.2 seconds). The finest granularity of specification
is 1 centisecond (0.01 seconds).
Leave Timer The period of time to wait after receiving an unregister request for an attribute before deleting the
attribute. Current attributes are a VLAN or multicast group. This may be considered a buffer time for
another station to assert registration for the same attribute in order to maintain uninterrupted service.
There is an instance of this timer on a per-Port, per-GARP participant basis. Permissible values are 20
to 600 centiseconds (0.2 to 6.0 seconds). The factory default is 60 centiseconds (0.6 seconds).