D-Link DWS-4000 Series, Cli Command Reference

Page: 218 / 566

D-Link Unified Switch CLI Command Reference
210
© 2009 D-Link Corporation. All Rights Reserved
known-client
This command configures a client MAC address in the local Known Client database. The action indicates whether to grant,
deny, or use global action for MAC authentication of the client.
no known-client
The
no
version of this command deletes an entry from the local Known Client database.
show wireless
This show command displays the configured Unified Switch global parameters and the operational status.
Format
known-client <macaddr> [name <name>] [action {global-action | grant | deny}]
Mode Wireless Config
Parameter Description
macaddr A valid MAC address.
name An alphanumeric string up to 32 characters in length.
global-action Default authentication action is global-action. Apply global action to the client.
grant Grant access to the client.
deny Deny access to the client.
Format
no known-client <macaddr>
Mode Wireless Config
Format
show wireless
Mode • Privileged EXEC
• User EXEC
Field Description
Administrative
Mode Shows whether the administrative mode is enabled.
WLAN Switch
Operational Mode Shows whether the wireless function on the switch is enabled.
WS IP Address Shows the IP address of the switch. If the routing package is enabled, this address belongs to a routing
or loopback interface.
AP Authentication
Mode Shows whether the AP must be authenticated by using the local database or a RADIUS database.
AP Auto Upgrade
Mode Shows whether the Auto Upgrade feature is enabled or disabled.
AP Validation
Method Shows whether to use the local or RADIUS server database for AP validation.
Client Roam
Timeout (secs) Shows how long to wait before a client that disassociates from this AP or a neighbor AP must re-
authenticate when it associates again.