D-Link DWS-4000 Series, Cli Command Reference

Page: 192 / 566

D-Link Unified Switch CLI Command Reference
184
© 2009 D-Link Corporation. All Rights Reserved
no ip vrrp timers advertise
This command sets the default virtual router advertisement value for an interface.
ip vrrp track interface
Use this command to alter the priority of the VRRP router based on the availability of its interfaces. This command is useful
for tracking interfaces that are not configured for VRRP. Only IP interfaces are tracked. A tracked interface is up if the IP on
that interface is up. Otherwise, the tracked interface is down.
When the tracked interface is down or the interface has been removed from the router, the priority of the VRRP router will
be decremented by the value specified in the
<priority>
argument. When the interface is up for IP protocol, the priority
will be incremented by the
<priority>
value.
A VRRP configured interface can track more than one interface. When a tracked interface goes down, then the priority of
the router will be decreased by 10 (the default priority decrement) for each downed interface. The default priority decrement
is changed using the
<priority>
argument. The default priority of the virtual router is 100, and the default decrement
priority is 10. By default, no interfaces are tracked. If you specify just the interface to be tracked, without giving the optional
priority, then the default priority will be set. The default priority decrement is 10.
no ip vrrp track interface
Use this command to remove the interface from the tracked list or to restore the priority decrement to its default.
ip vrrp track ip route
Use this command to track the route reachability. When the tracked route is deleted, the priority of the VRRP router will be
decremented by the value specified in the
<priority>
argument. When the tracked route is added, the priority will be
incremented by the same.
A VRRP configured interface can track more than one route. When a tracked route goes down, then the priority of the router
will be decreased by 10 (the default priority decrement) for each downed route. By default no routes are tracked. If you
specify just the route to be tracked, without giving the optional priority, then the default priority will be set. The default priority
decrement is 10. The default priority decrement is changed using the
<priority>
argument.
Format
no ip vrrp <vrid> timers advertise
Mode Interface Config
Default priority: 10
Format
ip vrrp <vrid> track interface <slot/port> [decrement <priority>]
Mode Interface Config
Format
no ip vrrp <vrid> track interface <slot/port> [decrement]
Mode Interface Config
Default priority: 10
Format
ip vrrp <vrid> track ip route <ip-address/prefix-length> [decrement <priority>]
Mode Interface Config