D-Link DWS-4000 Series, Cli Command Reference

Page: 146 / 566

D-Link Unified Switch CLI Command Reference
138
© 2009 D-Link Corporation. All Rights Reserved
Example: The following shows example CLI display output for the command.
(DWS-4026) #show lldp remote-device detail 0/7
LLDP Remote Device Detail
Local Interface: 0/7
Remote Identifier: 2
Chassis ID Subtype: MAC Address
Chassis ID: 00:FC:E3:90:01:0F
Port ID Subtype: MAC Address
Port ID: 00:FC:E3:90:01:11
System Name:
System Description:
Port Description:
System Capabilities Supported:
System Capabilities Enabled:
Time to Live: 24 seconds
show lldp local-device
Use this command to display summary information about the advertised LLDP local data. This command can display
summary information or detail for each interface.
show lldp local-device detail
Use this command to display detailed information about the LLDP data a specific interface transmits.
Time To Live The amount of time (in seconds) the remote device's information received in the LLDPDU should be
treated as valid information.
Format
show lldp local-device {<slot/port> | all}
Mode Privileged EXEC
Term Definition
Interface The interface in a slot/port format.
Port ID The port ID associated with this interface.
Port Description The port description associated with the interface.
Format
show lldp local-device detail <slot/port>
Mode Privileged EXEC
Term Definition
Interface The interface that sends the LLDPDU.
Chassis ID
Subtype The type of identification used in the Chassis ID field.
Term Definition