D-Link DWS-3024 User Manual Download Page 180

Page: 180 / 270

D-Link Unified Access System User Manual

Table 65

describes the information that displays for each portal.

The following buttons are available on the

CP Activation and Activity

page:

•

Block

—Click

Block

to prevent users from gaining access to the network through the

selected captive portal.

•

Unblock

—If the Blocked Status of the selected captive portal is

Blocked

, click

Unblock

to allow access to the network through the captive portal.

•

Refresh

—Click

Refresh

to update the screen with the most current information.

Table 65.

CP Activation and Activity Status

Field

Description

Operational Status

Indicates whether the captive portal is enabled or disabled.

Disable Reason

If the captive portal is disabled, then this field indicates the reason. The
portal instance may be disabled for the following reasons:

•

None - CP is enabled.

•

Administratively Disabled

•

RADIUS Authentication mode enabled, but RADIUS server is not
defined.

•

Not associated with any interfaces.

•

The associated interfaces do not exist or do not support the CP
capability.

Blocked Status

Indicates whether authentication attempts to the captive portal are currently
blocked.

Use the

Block

and

Unblock

buttons to control the blocked status. If the CP is

blocked, users cannot gain access to the network through the CP. Use this
function to temporarily protect the network during unexpected events, such
as denial of service attacks.

Note:

The Blocked Status is the operational status and not the configured

status. It does not persist over a reboot. By default, the status is unblocked.

Block

and

Unblock

are only available when the CP operational status is

Enabled.

Authenticated
Users

Shows the number of users that successfully authenticated to this captive
portal and are currently using the portal.

Summary of Contents for DWS-3024




































































































































































































































































Search results

Summary of Contents for DWS-3024

Reviews:

Brands by name

Popular brands

D-Link DWS-3024, User Manual

Search results

Summary of Contents for DWS-3024

Reviews:

Brands by name

Popular brands