![D-Link DWR-921 Quick Start Manual Download Page 2](http://html1.mh-extra.com/html/d-link/dwr-921/dwr-921_quick-start-manual_3973170002.webp)
Does this product automatically reconnect if the
mobile signal is lost due to inactivity? (Installation in an
unmanaged premises)
Yes - It will reconnect when the signal is requested or
available again.
Can this product be used as a failover solution?
Yes
Can this product be used for gaming?
Yes - We recommend a ping and speedtest, such as Ookla
(www.speedtest.net)
Can this product be used in a caravan?
Yes, If you have a caravan
It uses a standard 5v adaptor plug
Can this product be wall mounted?
Yes
Can this product be connected to an existing DSL / Fibre /
cable modem?
Yes, the device has a separate WAN port which allows you to
connect a xDSL modem.
In your prefered browser navigate to 192.168.0.1 in your
search bar to get to the admin page. Login with your
password (admin/admin by default)
In the WAN settings of your device you can change the type
of connection (DHCP or PPPoE) and enter any username and
password settings required for your connection.
Which kind of products can be connected via Ethernet
and / or Wi-Fi?
Any product can be connected, as long as they are complaint
with Wi-Fi standards
Typically connected products would be Cameras, VoiP
phones, Laptops Ipads etc.
Devices without wireless compatibility can be plugged into
the ethernet port
Which dynamic DNS providers are supported?
All Dynamic DNS providers are supported using the “custom
DNS provider settings”.
Is it possible to remove the external 4G antennas and
replace them with high gain indoor or outdoor antennas?
The DWR-921 has detachable antennas that can be replaced
Which connector type standard is used for the external
antennas?
The DWR-921 is compatible with third party aerial
manufacturers who use the SMA Standard type connectors.
Is it possible to turn off the Wi-Fi wireless connection for
safety reasons?
Yes, the device’s broadcast settings can be disabled from
within the settings.
Open your prefereed browser and connect to the device on
its default IP address of 192.168.0.1.
Navigate to the ‘Wireless’ settings and disable the SSID
broadcast.
Are the 2.4GHz and 5GHz SSIDs broadcast with different
names?
This device does not have a 5Ghz broadcast available to it as it
is 2.4Ghz only
How many Ethernet ports are available? Which is the
maximum supported speed?
Four 10/100 Ethernet LAN ports to connect wired devices
• Optional WAN port for fixed line broadband
I need to extend the wireless coverage further. Is there
any recommended range extender?
Yes, we would recommend you talk to our support team for
the best option, as it can often depend on your environment
Visit https://eu.dlink.com/uk/en/support/contact to raise a
support case or livechat