24
D-Link DWR-730 User Manual
Section 3 - Configuration
Wi-Fi
This section allows you to configure the IP settings for your
wireless network.
ip
v
4
Enter the IPv4 address for your Wi-Fi network. If you change
this address, you will need to enter the new address in your
web browser’s address bar in order to access the web-based
configuration utility.
Enter the IPv4 subnet mask for your Wi-Fi network.
Click
.Apply.
to save the current configuration.
ip
v
6
Enter the IPv6 address for your Wi-Fi network.
Enter the prefix to be used to delegate IPv6 addresses to the
LAN.
Check the box to set the router announcement mode to
autonomous.
Check the box to enable router announcement on-link
Click
.Apply.
to save the current configuration.
DNs N
Ame
Enter your router’s DNS device name in the field provided.
Click
.Apply.
to save the current configuration.
IP Address:
IP Subnet Mask:
IPv6 Address:
Prefix for LAN:
RA Autonomous:
RA On-Link:
DNS Device Name:
