30
D-Link DWR-113 User Manual
Section 3 - Configuration
INTBOUND FILTER SETTING
Select this box to
Enable
the filter.
You may select
Always On
or
choose the number of a schedule
rule that you have defined.
Copies the predefined filter to the
specified ID
INBOUND FILTER RULES LIST
Identifies the filter.
Specify the local IP address and then
specify the port after the colon.
Specify the remote IP address and
then the port after the colon.
Select this box to enable the filter.
Specify the schedule rule number.
Go back to the previous filter page.
Advance to the next filter page.
Click
Save Settings
to save your changes, or click
Don’t Save Settings
to discard your changes.
Inbound Filter
Inbound Filter:
Use Schedule Rule:
Copy to ID:
ID:
Source IP : Ports:
Destination IP : Ports:
Enable:
Schedule Rule #:
Previous Page:
Next Page:
Inbound Filter
enables you to control what packets are allowed to pass the router. Inbound filter only applies to packets that are destined
for Virtual Servers or DMZ hosts.
