23
D-Link DWR-111 User Manual
Section 3 - Configuration
Enter the IP address assigned to your network
connection.
Enter the subnet mask.
Enter the default gateway.
Enter the primary DNS server.
Enter the secondary DNS server.
You may need to change the Maximum Transmission
Unit (MTU) for optimal performance. The default
value is 1500.
The default MAC Address is set to the Internet port’s
physical interface MAC address on the broadband
router. It is not recommended that you change
the default MAC address unless required by your
ISP. You can use the
Clone Your PC’s MAC Address
button to replace the Internet port’s MAC address
with the MAC address of your Ethernet card.
Check this check box to disable network address
translation.
Click
Save Settings
to save your changes, or click
Don’t Save Settings
to discard your changes.
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS Server:
Secondary DNS
Server:
MTU:
MAC Address:
NAT disable:
Choose this Internet connection if your ISP assigns you a static IP address.
Static IP
