Quick Installation Guide
1
ENGLISH
Hardware Overview
Top Panel LED Indicators
Figure 1: Top Panel LED Indicators
#
LED
Description
1 Internet
A green light indicates that a WAN
Ethernet or LTE connection is
established.
2 RS-232
Flashing Blue Data packets
transmitted via
serial port.
3
Wi-Fi
OFF: Wi-Fi radio is disabled.
ON: Wi-Fi radio is enabled.
4
Signal
Strength
Blue
Signal strength is at
51-100%.
Amber
Signal strength is at
25-50%.
Red
Signal strength is
<25%.
Flashing Red No signal.
Table 1: Top Panel LED Descriptions
Front Panel Interface Connectors
Figure 2: Front Panel Interface Connectors
Before You Begin
This Quick Installation Guide gives you step-by-
step instructions for setting up your DWM-313
4G LTE M2M Router. The model you have
purchased may appear slightly different from
the one shown in the illustrations. For more
detailed information about the router, please
refer to the User Manual.
Package Contents
This DWM-313 package should include the
following items:
•
DWM-313 4G LTE M2M Router
•
AC adapter with 5.5 mm DC connector
•
RJ-45 cable
•
2 x external LTE antennas
•
1 x external Wi-Fi antenna
•
Quick Installation Guide
•
RS-232 cable (optional)
•
Warranty Card
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
Note:
Using a power supply with a different
voltage than the one recommended for the
device will cause damage and void the warranty
for this product.
System Requirements
•
Microsoft Windows®, or a Linux-based
operating system
•
An available Ethernet port
•
Microsoft Edge, Firefox 60.0, or Chrome
68.0.3440.106
1
2
3
4
1
2
3
4
