Chapter 3 – DWM Series WiMAX Utility
D-Link DWM-110 User Manual
10
Information
Click
to see the information page. This page displays
the status of your WiMAX connection.
WiMAX State
will display one of the following connecting
statuses:
Init:
The device is attempting to connect to a base station.
DL Synchronization:
The device is receiving downlink
information from a base station.
DL Acquisition:
The device is moving from one coverage
area to another, and is receiving downlink information from
another base station.
UL Acquisition:
The device is receiving uplink information
from another base station.
Capabilities negotiation:
Ranging:
The device is moving from one coverage area to
another, and is attempting to connect to a new base station.
Authorization:
The device is sending out authentication.
Registration:
The device is registering with a server.
Operational:
The device has successfully connected to a
base station and is ready to use.
Idle:
The device is in Power Saving mode.
Aborted:
The device is not connected to any base
station.
RSSI:
Received Signal Strength Indication, which
usually ranges from -100 to 0 dBm.
CINR:
Carrier to Interference plus Noise Ratio.
Frequency:
The operating frequency of the BS
connection.
