2
A.
First, connect the power adapter to the
receptor
at the back panel of the
DWL-G700AP and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED will turn
ON
to indicate proper operation.
B.
Insert one end of the cable to the
Ethernet port
on the back panel of the
DWL-G700AP and the other end of the cable to an
Ethernet Broadband Router
(i.e., D-Link DI-604) or
Switch
(i.e., D-Link DES-1005D).
Note
: You also have the
option of connecting the DWL-G700AP directly to the computer that will be used
for configuration. The Link LED light will illuminate to indicate a proper Ethernet
connection.
(
Note
: The Ethernet Port on the DWL-G700AP is Auto-MDI/MDIX.
Meaning you can use a straight-through or crossover-Ethernet cable to connect to
the Ethernet port on the DWL-G700AP.)
C.
The DWL-G630 AirPlus G Wireless Cardbus Adapter and the DWL-G510
AirPlus G Wireless PCI Adapter will connect, out of the box , with the
DWL-G700AP, using their default wireless settings. Computers with 802.11b/g
wireless adapters can also connect to the DWL-G700AP.
Connecting the DWL-G700AP Wireless
Access Point to Your Network
C.
Antennas
Used to
wirelessly connect to
802.11b/g adapters.
B.
LAN PORT
for
connecting the access
point to a switch on the
local network with an
ethernet cable
Reset Button
Pressing this button restores
the Access Point to its original
factory default settings.
A.
Receptor for
Power Adapter.
