16
Link Info
Using the Con
fi
guration Utility
(continued)
After clicking on the Con
fi
guration Utility icon, the
Link Info
screen will dis-
play the settings for the DWL-G630:
SSID:
The Service Set Identifier is
the name assigned to the wire-
less network. The factory SSID
setting is
default
.
Tx Rate:
Tx Rate settings are automatically determined for an optimal speed up to a
maximum of 54Mbps.
Status:
Displays the MAC address of
the access point or router to
which the DWL-G630 is asso-
ciated.
Channel:
The channel selection is automatically determined by the DWL-G630.
Frequency:
802.11g indicates that the
DWL-G630 is communicating
in the 2.4GHz band.
Encryption:
You can see if WEP (Wired Equivalent Privacy) is
Enabled
or
Disabled
here.
Wireless Mode:
Either
Infrastructure
or
Ad-Hoc
will be displayed here. (Please see the
Get-
ting Started
section in this manual for an explanation of these two modes.)
Signal Strength/Link Quality:
Packet Count:
Displays the statistics of the data packets that are transmitted and received.
Rescan Button:
Rescans for the strongest signal in your environment and associates with
that access point or router.
Displays the Link Quality for the DWL-G630 wireless connection to the ac-
cess point. The signal strength represents the wireless signal between the
access point and the DWL-G630. The percentage coincides with the graphi-
Authentication:
If Authentication is in use; it will be indicated here.
