D-Link DWL-8200AP - AirPremier Managed Dualband Access..., Product Manual

Page: 68 / 134

68
D-Link DWL-8200AP User Manual
There is a pull-down menu to select enabled or disabled. When
enabled, the selected device(s) will function as a DHCP client(s).
This allows them to receive IP configuration information from a DHCP
server. When disabled, the access point(s) must have a static IP
address assigned to them.
This pull-down selection enables or disables load balancing. When
you enable load balance you allow several access points to balance
wireless network traffic and wireless clients among the access points
with the same SSID. All the APs that share Load Balancing must
have the same SSID. Assign each access point a different
non-overlapping channel (e.g., 1, 6, 11).
Enter the number of the limit of load balancing users, from 0-64.
From the pull-down selection, choose either
Telnet
or
SSH
for
Console protocol.
This pull-down selection defines the timeout period during a Telnet
session with the selected device(s).
Select
Enable
to set the SNMP setting.
SNMP is disabled by default.
When SNMP is enabled, you can change the Public Community
Name here.
When SNMP is enabled, you can change the Private Community
Name here.
DHCP client
:
Load Balance
:
User Limit :
Console Protocol
:
Telnet Timeout
:
SNMP:
Public Community
Stream:
Private Community
Stream: