47
Using the AP Manager (continued)
Device Configuration>AP Mode
• Access Point
: The default setting used to create a wireless LAN.
• PtP Bridge
: Allows you to connect two wireless LANs together. This only works
with another DWL-7200AP. If enabled you must enter the MAC address of the other
DWL-7200AP.
• PtMP Bridge
: Allows you to connect mulitple wireless LANs together. All other LANs
must be using DWL-7200APs. When enabled, you must enter the MAC address of
the other DWL-7200APs. Enter up to eight addresses.
• AP Repeater
: Allows you to repeat the wireless signal of the root access point.
When enabled you must enter the MAC address of the root access point.
The following features are configurable in IEEE802.11a & IEEE802.11g:
• AP Client
: Allows any device with an Ethernet connection to connect to the wireless
network via another DWL-7200AP, such as a printer, gaming console (Xbox, PS2), or
a computer. You will need to enter the SSID of the DWL-7200AP that is functioning
as an AP.
