2
Connecting The DWL-700AP Wireless Ac-
cess Point To Your Network
A.
First, connect the power adapter to the
receptor
at the back panel of the
DWL-700AP and then plug the other end of the power adapter to a wall outlet
or power strip. The Power LED will turn
ON
to indicate proper operation.
B.
Using a Ethernet cable, insert one end of the cable to the
LAN port
on the
back panel of the DWL-700AP and the other end of the cable to a switch.
Note
: You also have the option of connecting the DWL-700AP directly to the
computer that will be used for configuration. The Link LED light will illuminate
to indicate a proper Ethernet connection.
C.
Computers with 802.11b wireless adapters such as the DWL-650
Air
Wireless Cardbus Adapter and the DWL-520
Air
Wireless PCI Adapter can
connect to the DWL-700AP. By default, the DWL-700AP SSID is set to
‘default’ with a Channel setting of ‘6’.
C
.
Antenna
Used to wirelessly
connect to 802.11b
networks.
B
.
LAN Port
This is the connection for
Ethernet cables to your
Ethernet-enabled device.
A
.
Receptor for
Power Adapter
Reset Button
