38
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Advanced > Multi-SSID (continued)
VLAN ID:
If you configure enable Guest access and configure Internal and
Guest networks on VLANs, this field will be enabled.
Provide a number between 1 and 4094 for the Internal VLAN.
This will cause the access point to send DHCP requests with the
VLAN tag. The switch and the DHCP server must support VLAN
IEEE802.1Q frames. The access point must be able to reach the
DHCP server.
Check with the Administrator regarding the VLAN and DHCP
configurations.
Select
HEX
or
ASCII
.
Select
64-bit
,
128-bit
, or
152-bit
.
Select the 1st key all the way through the 4th key, to be set as the
active key. Enter key here.
Key Type:
Key Size:
Key:
When Primary SSID is set to any of
the following security levels:
Multi-SSID can use any of these
security levels:
None
Open System (WEP)
Shared Key (WEP)
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
None
Open System (WEP)
Shared Key (WEP)
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
WPA-Enterprise
WPA2-Enterprise
WPA-Auto-Enterprise
None
Open System (WEP)
Shared Key (WEP)
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
WPA-Enterprise
WPA2-Enterprise
WPA-Auto-Enterprise
Note: If WPA or WPA2 is being used, it will occupy the key space 2 and 3, which will
leave key 1 and 4 for other SSIDs to use for WEP.
When you configure one Multi-SSID, you must click
Save to Table
and then click
Apply
to save your settings.
