D-Link DWL-3150 Install Guide
Connect a standard Ethernet cable from the DWL-3150 to an Ethernet
port on the computer that will be used to configure the DWL-3150.
You must assign your computer a static IP address within the same
range as the IP address of the DWL-3150. The DWL-3150’s default
IP address is
192.168.0.30
with a Subnet Mask of 255.255.255.0.
If your network is using another network (I.E. 192.168.1.xxx), then
configure only 1 computer using the steps below.
Step 1
Windows
®
XP - Click on
Start
>
Control Panel
>
Network
Connections
.
Windows
®
2000 - From the desktop, right-click
My Network Places
>
Properties
.
Step 2
Right-click on the
Local Area Connection
which represents your
D-Link network adapter and select
Properties
.
Step 3
Highlight
Internet Protocol (TCP/IP)
and click
Properties
.
Step 4
Click
Use the following IP address
and enter an IP address of
192.168.0.10 and a subnet mask of 255.255.255.0. Do not enter a
gateway or DNS server address.
Step 5
Click
OK
twice to save your settings.
You will now be able to connect to the DWL-3150 to configure it. Once
configured, you may change your computer’s IP settings back.
Using the Setup Wizard
