34
Using the AP Manager (continued)
You can assign an IP address to an AP or assign IP
addresses to multiple AP’s by clicking on this button
after selecting the device(s).
IP Configuration
Select the AP that you want to assign an IP address to and click the IP button. Enter
the IP address and IP netmask for the selected device and click OK.
You can configure multiple AP’s with IP addresses all at once. Click on the IP button
after you’ve selected all of the AP’s you want to assign an IP address. Enter the IP
address you want to assign the first unit and the AP manager will automatically assign
sequential IP addresses.
Selecting Devices
The AP Manager allows you to configure multiple devices all at once. To select a single
device, simply click on the device you want to select. To select multiple devices, hold
down the
Ctrl
key while clicking on each additional device. To select an entire list, hold
the
Shift
key, click on the first AP on the list and then click on the last AP on the list.
